|Projector type||LCD projectors|
|DLP™ chip | Number of Pixels||2,304,000 ( Pixels 1920 x 1200) pixels x 3|
|Light source||Laser diodes|
|Light output*1||16,000 lm|
|Time until light output declines to 50 %*2||20,000 hours (NORMAL)|
|Resolution||1920 x 1200 pixels|
|LENS||Optional powered zoom lenses|
|Lens shift | Vertical (from center of screen)||±60 % (±40 % with ET-EMW200, ±50 % with ET-EMW300) (powered)|
|Lens shift | Horizontal (from center of screen)||±20 % (±19 % with ET-EMW200) (powered)|
|Keystone correction range||Vertical: ±40° (±14° with ET-EMW200/ET-EMW300, ±22° with ET-EMW400/ET-EMW500), Horizontal: ±15° (±8° with ET-EMW200/ET-EMW300)|
|Keystone correction range with optional ET-UK20 Upgrade Kit||Vertical: ±40° (±14° with ET-EMW200/ET-EMW300, ±22° with ET-EMW400/ET-EMW500), Horizontal: ±40° (±8° with ET-EMW200/ET-EMW300, ±15° with ET-EMW400/ET-EMW500)When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °.|
|Installation||Ceiling/floor, front/rear, free 360-degree installation|
|Terminals | SDI IN||BNC x 1: 3G/HD-SDI input|
|Terminals | HDMI IN||HDMI 19-pin x 1 (Compatible with HDCP 2.2, Deep Color, 4K/60p signal input*3)|
|Terminals | DVI-D IN||DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)|
|Terminals | REMOTE 2 IN||M3 x 1 for wired remote control|
|Terminals | LAN||RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net)|
|Power supply||AC 100-240 V, 50/60 Hz|
|Power consumption||1,050 W|
|Cabinet materials||Molded plastic|
|Operation noise*1||38 dB (NORMAL) / 32 dB (Quiet)|
|Operating environment||Operating temperature: 0–45 °C (32–113 °F)*6; Operating humidity: 10–80 % (no condensation)|
|Applicable software||Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit, ET-CUK10 Auto Screen Adjustment Kit),Smart Projector Control for iOS/Android™|
|Note||*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped. *2 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcastcontents, NORMAL Mode, Dynamic Contrast , under conditions with 35 °C (95 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3of particulate matter. Estimated time until light output declines to 50 % varies depending on environment. *3 4K signals are converted to theprojector’s resolution (1920 x 1200 pixels) upon projection. Supported terminals: DIGITAL LINK/HDMI®. *4 With legs at shortest position. *5 Average value. May differ depending on the actual unit. *6 When using the projector at an altitude lower than 2,700 m (8,858 ft) above sea level,and the operating environment temperature becomes 35 °C (95 °F) or higher, the light output may be reduced to protect the projector.|
|Terminals | REMOTE 1 IN||D-sub 9-pin (female) × 1 for external control (parallel)|
|Contrast Ratio*1||3,000,000:1 (Full On/Full Off) * With [Dynamic Contrast] set to |
|Center-to-corner zone ratio*1||85 %|
|Filter||Included (Estimated maintenance time: approx. 20,000 hours)|
|Terminal | RGB In||D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR)|
|Dimensions (W x H x D)||650 x 211*4 x 440 mm (25 19/32˝ x 8 5/16˝*4 x 17 21/64˝ ) (Without lens)|
|Terminals | DC OUT||USB Connector (Type A) x 1 (Output 5 V/2 A)|
|DLP™ chip | Panel size||25.4 mm (1.0 in) diagonal (16:10 aspect ratio)|
|Terminals | DIGITAL LINK||RJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net,
HDCP 2.2, Deep Color, 4K/60p signal input*3)
|Terminals | SERIAL/MULTI PROJECTOR SYNC IN||D-sub 9-pin (female) x 1 for external control (RS-232C compliant)|
|Terminals | SERIAL/MULTI PROJECTOR SYNC OUT||D-sub 9-pin (male) x 1 for link control (RS-232C compliant)|
|Weight*5||Approx. 22.3 kg (49.2 lbs)|
|Screen size [diagonal]||2.03–12.7 m (80–500 in), 16:10 aspect ratio|
|Terminals | Remote 2 Out||M3 x 1 for link control (for wired remote control)|
Pure Color, High Brightness, and Long-Life Operation
At up to 16,000 lm*1, color erupts in WUXGA. Radiant pictures are achieved with new 15.4 mm (1˝) LCD panels, Multi-Laser Drive Engine, 4K/60p signal input*2, and refined cooling system.
Unbeatable Reliability in the Real-World Conditions
To quickly fix problems while maintaining image display, the projectors feature Panasonic’s new Multi-Laser Drive Engine with failover circuity, a secondary backup signal input, and Information Monitor to show error information.
Compact, Flexible, and Ready for a Stress-free Install
Easy-to-handle compact body weighs under 22.3 kg*3 (49.2 lbs.), runs at just 32 dB*4, and suits seven optional zoom lenses for flexible installation. Setup is expedited with Geo Pro software*5.
1 Brightness for PT-MZ16KL only. Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped.
2 4K signal input is converted to the projector’s resolution (1920 x 1200). Applicable terminals: DIGITAL LINK terminal/HDMI terminal.
3With standard ET-EMS600 lens included.
4Quiet Mode for PT-MZ16KL.
5For more information about activation of optional upgrade kits, please visit PASS for more information.